How To Set Time On Smartwatch

Z7_3054ICK0KGTE30AQO5O3KA30N0

hp-concentra-wrapper-portlet

Actions

Isaac Mizrahi Smartwatch Engineered by HP - Oftentimes Asked Questions (FAQs)

Notice answers to oft asked questions near the Isaac Mizrahi Smartwatch Engineered by HP.

General information about the Isaac Mizrahi watch

Does the sentry work without a smartphone?

Yes. The sentry has an analog brandish which shows the time, whether the watch is connected to a smartphone or not. The sentinel requires a smartphone and the app for total smartwatch functionality.

Is the watch water resistant?

The watch is tested to encounter international standards for water resistance and is water resistant up to 30 meters (3ATM).

Where can I detect the picket serial number?

The watch serial number can exist found in the Help department of the Isaac Mizrahi app, and is also etched on the dorsum of the picket.

Installing the Isaac Mizrahi Smartwatch app

Which versions of iOS/Android are supported?

The Isaac Mizrahi app is designed for utilize with nearly smartphones running iOS version 8 and later or Android version four.4 and later on.

Are tablets supported?

No. Tablets, including iPads and Android tablets, are not supported. The picket works just with smartphones running iOS version 8 and later or Android version 4.4 and after.

How do I install the app?

On your telephone, go to watches.hp.com (in English) and select your lookout. Download and install the Isaac Mizrahi Smartwatch app. Or, open the app shop on your phone and search for "Isaac Mizrahi Smartwatch," and download and install the app.

Setting up and using the Isaac Mizrahi watch

How do I remove the protective sticker from the dorsum of the watch?

A sticker is used on the back of the sentinel example to avoid scratches during the aircraft process. Yous must remove the sticker earlier charging and using the sentinel.

To remove the sticker, notice the edge of the sticker and peel the sticker off. You lot might also find a contraction or bubble in the sticker where information technology is non completely adhered to the watch back. You lot can also use this area to pull off the sticker.

How do I clean the back of the lookout man?

You lot can clean the dorsum of the watch case and the charging pins with isopropyl rubbing booze (IPA).

Dampen a soft, lint-complimentary cloth with a modest amount of IPA and thoroughly wipe the back of the watch case and the charging pins.

Never apply soap or whatsoever chemicals other than isopropyl rubbing alcohol to clean the charging pins or the back of the watch case.

Why is the watch unresponsive during initial setup?

When purchased, the watch is in shipping fashion. Charge the lookout for at to the lowest degree four hours, and and then printing and hold the top watch button until the Setup screen displays.

How do I set the time?

Gently pull the crown out to its outermost position. Rotate the crown in either direction to move the hour and minute easily to the correct fourth dimension, and then button it dorsum in.

How practice I transfer ownership of the watch, or use the spotter with a dissimilar telephone?

In the app, tap Preferences, and then tap Forget Watch.

On iOS devices, go to Bluetooth settings and Forget the connected picket.

If the scout needs to be manually reset, press and hold the bottom button while simultaneously pressing the height push button iii times.

Can I apply my scout to answer a phone call or text?

No, the lookout man but receives notifications of calls and texts from your smartphone. Utilize your phone to answer calls or reply to texts.

How do I navigate the different features on the scout?

The default land on the scout shows the local time.

Press the top picket button to navigate betwixt World Clock and Action Tracker. To display the fourth dimension in your next selected city or view yesterday's steps in Activity Tracker, press the bottom spotter button.

Pairing your lookout with your phone

How do I turn Bluetooth on or off on my phone?

Bluetooth is unremarkably institute in the Settings carte du jour on both iOS and Android phones. See the manufacturer'southward documentation for specific instructions to enable or disable Bluetooth on your device.

How do I pair the picket with my phone?

Make certain Bluetooth is enabled on your telephone.
Open the Isaac Mizrahi app, create a new account or sign in, and so follow the on-screen instructions.
The app automatically searches for nearby watches. When the lookout man is constitute, tap Connect Lookout man to pair the phone with the scout.
When prompted, press the tiptop watch button and enter the PIN displayed on your scout.
To complete pairing, tap Next on the phone app. The app will indicate that the pairing is successful.

note:
For more than detailed data, see the online user guide.

Why can't my phone detect or connect to the watch?

Make sure Bluetooth is enabled in the telephone settings.
Increase the signal strength past moving the sentinel closer to the telephone.
Make certain the watch is in pairing mode by pressing the bottom watch button until the Setup screen displays.
Brand sure the lookout is charged.
If you are using iOS, make certain the lookout is not already connected at a arrangement level by checking Bluetooth settings and forgetting whatsoever connected Isaac Mizrahi watches.

My watch keeps disconnecting from my phone. How practise I make the devices reconnect?

Make sure the spotter is not in airplane fashion. Press and release the bottom and top buttons at the aforementioned fourth dimension to plough airplane way on or off.
Make certain the phone is not in airplane fashion and that Bluetooth is enabled.
On the phone, turn Bluetooth off and on, and plough aeroplane style on and off.
If the watch is non communicating or the telephone app indicates it is disconnected from the lookout, stop and so restart the app.
- In iOS, stop the app by double-tapping the telephone's home button and swiping upward on the app. Restart the app to reconnect to the lookout man.
- In Android, force cease the app. See the phone manufacturer'southward documentation for instructions specific to your device. Restart the app to reconnect to the watch.
Restart the phone and and then open up the app to reconnect.
If none of the above solutions worked to reconnect the watch and phone, delete the app from your telephone and reset the lookout man to factory settings (press and concord the bottom watch push while pressing the top watch button three times. When prompted to confirm the reset and clear all user information, press the bottom watch push to consummate the reset, or printing the summit sentry push button to cancel). Perform the setup and pairing procedure again.
If the sentry yet does not connect, visit watches.hp.com (in English language) to contact back up.

Notifications and settings

What to the vibration patterns bespeak?

Almost high-priority notifications apply a longer vibration pattern than low-priority notifications.

See the following list of the default vibration notifications on the scout:

Figure : Spotter vibration notification patterns

You lot tin can enable a notification vibration for any third-party app. All notification vibrations not enabled by default are set automatically to low priority.

How practise I dismiss a notification on the watch?

To dismiss a notification or decline a telephone call, printing the top watch button once.

To dismiss all notifications, press and concord the tiptop watch push button for ii to iii seconds.

How do I temporarily disable notifications and prevent them from alerting the watch?

In the Isaac Mizrahi app, yous can ready "exercise not disturb" way through the Preferences menu. On the app Home screen, tap Preferences, and then tap the on/off button adjacent to Silence watch notifications between [xx] and [twenty]. Prepare a start and end fourth dimension for the "do not disturb" flow.

Notifications are not displaying on my scout.

Make sure that the lookout and phone are inside Bluetooth range and actively continued. Open the app and confirm that the watch is connected.
Make certain that the sentry is adequately charged.
Make sure that the notifications settings for each app are enabled.
Notifications might exist disabled in the Android or iOS settings. Open up the notification settings on your phone to brand certain notifications are enabled for each of the desired applications.

How practise I turn airplane mode on or off?

To turn Airplane Mode on or off, press and release the tiptop and lesser buttons at the aforementioned time.

When Airplane Mode is enabled, the spotter displays an Aeroplane Manner: On confirmation.

When Airplane Mode is disabled, the sentinel displays an Airplane Style: Off confirmation.

Batteries and charging

How do I charge the spotter?

Before connecting the ability cablevision to a power source, connect the charger to the lookout.
Connect the USB end of the power cable to a power source, such equally a USB port on your figurer or a USB-to-AC plug adapter connected to a wall outlet.

notation:
You must brand sure that the sentinel is connected deeply to the charger. When the picket is successfully connected to the charger, information technology vibrates twice.

note:
The first time you accuse the sentry, the watch brandish might exist blank. After y'all ready the watch, the charging icon and battery icon alternating on the display when the sentinel is properly connected.
Charge the picket for at least iv hours.
When finished, first disconnect the ability cable from the power source, and then disconnect the charger from the sentinel.

notation:
Each fourth dimension yous charge the sentinel, disconnect the cable from the power supply, and thoroughly wipe the charger and watch contact pins with a soft, lint-free textile. If needed, you may dampen the material with a pocket-size corporeality of isopropyl rubbing booze. Make sure the rubbing booze does non come into contact with any other parts of the watch or the watch strap. Never utilise soap or any other chemicals to clean the watch contact pins or charger.

What type of power supply should I use when charging the watch?

Use a USB-to-Ac adapter, such as the adapter that came with your smartphone.

How long does the watch have to charge?

It takes approximately 2 to 3 hours to accuse the battery from 0% to 100%.

How often practice I demand to charge the watch?

You should be able to use the watch for three to v days (with typical use) before it needs to exist recharged.

How exercise I view the corporeality of battery remaining?

The percentage of battery remaining displays on the app Home screen.

Press and agree the lesser picket push to display the remaining bombardment percent on the sentinel screen.

When the battery that powers the digital functions of your watch has less than a 20% accuse, a notification displays. When the digital sentinel battery has less than a ten% charge, another notification displays.

Will the watch yet keep time if the battery level is critically low?

The watch contains 2 batteries. I battery controls the digital functions of the watch and tin can be recharged. The other battery controls the analog functions of the scout and is non rechargeable. When the digital battery level is critically low, the other battery continues to ability the analog watch role.

The watch hands stopped moving, but I nevertheless get notifications and the spotter is notwithstanding connected to the phone.

The bombardment that powers the watch hands might need to be replaced. Battery replacement requires service. Visit watches.hp.com (in English) to contact support.

Never open the watch or effort to supervene upon the batteries yourself; opening the watch case will void your warranty.

Tin I supersede the lookout man batteries?

No. Removing or replacing the batteries yourself voids warranty coverage. Visit watches.hp.com (in English) to contact back up for battery replacement.

Why isn't the watch charging?

Make sure the charger is continued. When the watch is successfully connected to the charger, information technology vibrates twice, and the charging icon and battery icon alternating on the display.

If the sentry is still not charging, you might need to make clean the charger contact pins on both the watch and the power cable. Disconnect the cablevision from the power supply, and thoroughly wipe the charger and watch contact pins with a soft, lint-complimentary material. If needed, y'all may dampen the cloth with a small amount of isopropyl rubbing booze. Make sure the rubbing booze does not come into contact with any other parts of the sentinel or the watch strap. Never utilize lather or any chemicals other than isopropyl alcohol to clean the lookout or charger contact pins. Cleaning is recommended before each time you charge your watch.

Updating and resetting

How do I update the app?

When a software update is available, the app Dwelling house screen displays an update banner. Tap Install At present, and then tap Get-go Installation to begin updating the app. Exercise not press the watch buttons or shut the app until the update is complete.

What practice I do if an update fails?

If there is an error message, tap Retry.

If the problem persists, abolish the update and visit watches.hp.com (in English) to contact back up.

The watch is unresponsive. How do I restart the watch?

To restart the sentinel, press and hold both watch buttons for three seconds. Printing the bottom watch push button to consummate the restart, or press the height watch button to abolish.

How exercise I reset the watch to manufacturing plant settings?

annotation:
Resetting the sentry to mill settings removes all user information from the sentry. Reset the watch merely if y'all are experiencing a serious problem that has non been solved after trying all other troubleshooting methods, or if you are transferring buying of the sentinel to someone else.

To reset the watch to mill settings, press and hold the bottom watch button while pressing the top sentry button three times. When prompted to confirm the reset and articulate all user data, press the bottom spotter button to complete the reset, or press the top watch button to abolish.

Maintenance, support, and warranty

How do I make clean the sentinel?

Before cleaning, make sure the ability cable is disconnected from the power supply.

Thoroughly wipe the charger and picket contact pins with a soft, lint-free cloth. If needed, you may dampen the cloth with a pocket-sized amount of isopropyl rubbing alcohol. Brand certain the rubbing alcohol does not come into contact with whatever other parts of the lookout man or the sentry strap. Never use soap or any chemicals other than isopropyl alcohol to clean the lookout man or charger contact pins. Cleaning is recommended before each time y'all charge your watch.

Where can I observe boosted maintenance and support information?

For additional full general watch care and maintenance data, also as client service and support, visit watches.hp.com.

How long does the warranty last?

The Isaac Mizrahi watch comes with a ane-twelvemonth express warranty. For full terms and conditions, visit watches.hp.com.

note:
Never open the watch or attempt to change the batteries yourself; opening the watch case volition void your warranty.

Source: https://support.hp.com/gb-en/product/isaac-mizrahi-gold-smartwatch/9684457/document/c05031640